Welcome to Qatar Electricity & Water Co.

Operation Supervisor

Qualification BE / B.Tech Degree
Age Between 28 and 35
Experience 7 to 10 years
Responsibilities Job Objective:

The Operation Supervisor is responsible for monitoring the operating plant the directing and supervising a team of operators; in performing the operation activities under the directions of the Shift Charge Engineer, ensuring standard utility practices & reliable and efficient production. Interact & coordinate with control room Supervisors and Operators related to plant operations and Isolations, as per the SOP.ensuring best engineering practices; optimum use of manpower, interface & coordination with other departments regarding plant matters, ensuring the implementation of safety procedures & policies, production reliability & efficiency. He is also responsible for updating the plant management prevailing conditions/important matters/production etc. The Operation Supervisor is experienced in operational activities, safely and efficiently monitoring the day-to-day plant Operation and is responsible for optimizing the performance of these operational processes by coordination, communication & handling plant emergencies; defect identification and initiation. He executes the assigned work under the guidance of the Shift Charge Engineer in the most efficient manner; working towards the goals/targets and vision set by QEWC management.

Key Accountabilities:
· Responsible for assigned site Monitoring, Supervision & coordination of Plant Operation of relevant site location ensuring operations are conducted in a safe and efficient manner. conducted in a safe and efficient manner. Directs the activities of shift operators towards safe, reliable and effi­cient operation of the plant while meeting the appropriate standard requirements affecting the plant. Responsible for monitoring of the following Units/equipment
o Gas / steam Turbines and its associated auxiliaries.
o Electrical distribution boards of his assigned zone of various voltage levels.
o Fuel Gas distribution systems, scrubber units and related control systems
o Cooling water systems for the power station
o Emergency Diesel Generator and Black Start Systems.
o Cable Trenches, tunnels and Switchyard.
o All Transformers and Lighting systems of his allocated area
o Balance of Plants of his area and all other allocated areas as assigned.
· Monitor all Unit/equipment operating conditions related to safe working parameters and identify any abnormality or deteriorating operating conditions and initiate actions as per the approved procedures.
· Ensuring that the Equipment and unit are in operation in a safe and efficient condition at all times in accordance to OEM O & M procedures and the approved SOPs. Coordinating with various Maintenance Department personnel for carrying out the planned/breakdown maintenance activities, and equipment trial run, commissioning tests and Checks etc.
· Ensure that loading, start up and shut down procedures for all plant equipment and processes are carried out correctly and coordinated with CCR and site Operators.
· Coordinate with CCR Supervisors for safe plant operation and handling abnormal plant or emergency conditions and assist SCEs in early and safe plant restoration after the emergency.
· Assist SCE/Permit Engineer in Isolating and Normalizing Plant/Unit/equipment for issuing/ cancelling of permits to maintenance, as directed by SCE and in coordination with CCR.
· Log Meter readings, along with Purchaser KM personnel on a monthly basis and the daily Production readings of the relevant area and meter readings relevant to the area.
· Maintain the Operation documentation & database, by carrying out the detailed shift data logging of all activities related to his site.
· Carry out Inspections as per the scheduled inspection activity.
· Identify Plant process related defects and also defects on non-process plant assets of his assigned area and Initiate Defect Cards on DCMS.
· Issue of Limitation of Access Document to facilitate Maintenance checks and works.
· Coordinate all activities during commissioning of units/equipments,
· Carry-out scheduled equipment changeover and document.
· Ensure that all works in his assigned area is carried out with valid Permit/LOA and no work is carried out beyond the permitted zone.
· Identify any act by either QEWC or contractor staff which can lead to either personnel hazard or Plant/process disturbance and stop the same and report to the SCE/Management.
· Ensure all in-field activities carried out safely complying with company environmental health & Safety (EHS) guidelines and procedures at all times within the power station.
· Execute/coordinate plant emergency drills for major fires, leakages, radiation releases and other safety related accidents (drill activities included transport, fire brigades and ambulances arrangements
· Perform personnel functions such as reporting of staff duty absenteeism, staff discipline overtime
· Ensure Safe and best housekeeping in his allocated work site with the help of assigned staff and arrange to report and follow up on material storage, hazardous condition etc.
· Assume the responsibilities of other Operation Supervisors in the areas of their responsibility, in their absence.
· In addition to main areas of responsibilities the supervisor will be assigned to cross training to the other areas as and when required, most likely in similar plants.
· Assist in providing training to new staff and Qatari staff as assigned.
· Any assigned works and special tasks as and when required by the Management.

Qualification, Experience, Skills:

· BE / B.Tech Degree
· 7 Years experience in operations of large modern power plants is required.
· Experience in Water processes and Boilers is a must.
· Experienced in DCS system operations is required.
· Must be computer literate with knowledge of MS office applications and exposure to Computer based maintenance management systems will be an added advantage.
· Age shall be between 28 - 35 years.
· Work requires excellent & professional written and verbal communication and interpersonal and analytical skills. Ability to motivate teams and work with multinational workforce
· Work requires willingness to work a flexible schedule.

Communication & Working Relationships:

· Daily communication of work in progress with Shift Charge Engineer
· Regular communication with maintenance for day and week ahead plans
· Contractors on site on progress of ongoing operation activities.


· Analytical Thinking
· Compliant To Safety, Quality & Environment
· Technical Expertise & Development
· Teamwork & Cooperation
· Commercial Awareness